Welcome Stranger to OCC!Login | Register

VIVO CASE-V07 Review


VIVO CASE-V07 Specifications:

Form Factor:
ATX Mid-Tower
17.71" x 7.87" x 18.50" (L x W x H)
Drive Bays:
5.25" external x 1
2.5" internal SSD bays x 2
Motherboard Support:
ATX, Micro ATX, and ITX motherboards (up to 12.0" x 9.6")
PSU Support:
ATX power supply (not included)
Graphics Card Support:
VGA card length up to 380mm
Shiny black front and top with matte black sides and back (full black interior)
Expansion Slots:
x3 front 120mm blue LED fans
x2 top 120mm fan ports
x1 rear 120mm fan port
x2 bottom 120mm fan ports
Front Panel:
x1 USB 3.0
X2 USB 2.0
HD Audio (for headphones and mic)
Power and reset
9.7lbs (4.4kg)
Radiator Support:
Supports up to x3 water cooling radiators (x2 240mm and x1 120mm)
Maximum CPU Cooler Height:
CPU cooler height up to 161mm
Dust Filters:
Front, Bottom and Top panel


VIVO CASE-V07 Features:

  • Filtered front and power supply ventilation
  • Cable management
  • Thumb screw mounted side panels for easy access
  • Large side window
  • Power supply/HDD chamber with excellent ventilation

All information courtesy of VIVO //vivo-us.com/collections/computer-cases/products/copy-of-case-v00-br-br-span-style-font-weight-normal-vivo-atx-mini-tower-computer-gaming-pc-case-black-3-fan-mounts-usb-3-0-port-span-1


VIVO CASE-V07 Testing:

Testing involved recording temperatures in degrees Celsius for the CPU and GPU during idle and load phases. The load was simulated by running Prime95’s small FFTs and 3DMark Vantage for one hour. The maximum temperatures were recorded using HW Monitor 1.21.0. Please note that each case is tested from its factory setup, including location of fans, unless otherwise noted.


Testing Setup:




Now it is time to bring out the thermal imaging camera and see where the heat is. In the picture to the left, the CPU is at idle and shows exhaust air at around 31 °C. The blue areas are the coolest (ambient) followed by red, which is a little warmer, increasing to orange, and finally the warmest being yellow.  The fans from the D14 CPU cooler direct the excess heat to the rear of the case, where it is then pushed out. After kicking in the mild overclock, the temps go up to about 42 °C coming out of the rear of the case. There is another hot spot toward the bottom, and that is the power supply working hard (and generating heat) to supply the system with enough power. 

GPU testing shows similar results to other test cases, and this is to be expected when using a reference style (blower) GPU. The blower pulls cool air from the case and ejects it out of the rear, so heat build up in the case is minimal. I like reference style coolers, although they can be a bit noisy when the fan spools up.

With all the thermal testing done, I can say that the case performed as expected, and the three included front 120mm fans did a good job of keeping the air flowing through the case. Most people don't keep their systems constantly stressed, so heat build up is not really an issue. But this testing shows that the CASE-07 can handle the heat. Of course, there is room for a couple more fans at the top, and two more on top of the power supply, so you can move even more air to meet the needs of your system.


  1. VIVO CASE-V07: Introduction & Closer Look
  2. VIVO CASE-V07: Specifications & Testing
  3. VIVO CASE-V07: Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1337881088   (xlweb1)