Welcome Stranger to OCC!Login | Register

Thermaltake Armor Revo Snow Edition Review



Case Type   
Full Tower
Front Bezel Material   
Combination of plastic and high air flow mesh
Interior: Black
Exterior: White
Side Panel         
Swivel Door with Transparent Window
Motherboard Support   
9.6” x 9.6” (Micro ATX)
12” x 9.6” (ATX)
Motherboard Tray   
5.25" Drive Bay   
Ext. 3.5" Drive Bay   
By using 5.25" to 3.5" Converter
Int. 3.5" Drive Bay   
Expansion Slots   
Front I/O Ports   
USB 3.0 x 2
USB 2.0 x 2
eSATA connector x 1
Mic & Speaker
Supports AC’97 & HD Audio
Cooling System
Front (Intake):
200 x 200 x 30 mm Blue LED fan x 1 (600-800 rpm,13-15 dBA) or 120 x 120 x 25 mm x 2 (optional)
Rear (Exhaust):
140 x 140 x 25 mm TurboFan, 1000 rpm, 16 dBA or 120 x 120 x 25 mm x 1 (optional)
Top (Exhaust):
200 x 200 x 30 mm Blue LED fan x 1 (600-800 rpm, 13-15 dBA); 200 x 200 x 30 mm x 1 (optional) or 140 x 140 x 25 mm x 2 (optional) or 120 x 120 x 25 mm x 2 (optional)
Bottom (Intake):
120 x 120 x 25 mm x 1 (optional)
Side (Intake):
200 x 200 x 30 mm x 1
Liquid Cooling Capable   
Liquid Cooling Embedded   
Power Supply Supported   
Standard ATX PSII Power Supply
Power Supply Included   
Dimension (H*W*D)
586 x 254.0 x 552 mm
23.1 x 10 x 21.7 inches
Net Weight
11.5 kg
25.35 lb
Security Lock   
for peripherals only
Suitable for gaming, enthusiast, DIY and modding




  • Plug&Play side-panel fan: With the Armor Revo’s Plug&Play side-panel fan, the power circuit is established as soon as side-panel of the chassis is closed. And because there are no lose wires or connection to make, the user will no longer have to worry about snapping off the power connector.
  • More power, less heat: Armor Revo features not one, not two, but three oversized 200 mm fans which are all pre-routed to the centralized fan controller that is conveniently located on the front of the chassis that allows user to easily lower or increase fan speed as needed.
  • Liquid cooling ready: In addition to the spacious interior that enables power users to easily work on the ultimate liquid cooling setup, the Armor Revo features ample room for 24 cm high-performance radiator.
  • CableClear Cable Management: Cable management used to mean tucking all the excess cables into any available space you can find. With the CableClear Cable Management, the excess cables are now routed properly so you won’t pull off all your hair when upgrading down the road.
  • SuperSpeed USB 3.0: The wide-spread adoption of SuperSpeed USB 3.0 interface enables blazing-fast data-transfer and even supplies higher 5V power (900mA). And yes, Armor Revo adopts the most up-to-date internal USB 3.0 19-pin connector.
  • You are in control: Don’t let manufacturers tell you how the lighting or fan speed should be set at. With Armor Revo’s lighting & fan speed control conveniently located on the front of the chassis, you are in total control.
  • Hot-swap hard drive docking station: While USB 3.0 offers high-speed data transfer, moving big chunks of data usually means a hard drive or two. This is where the hot-swap hard drive docking station comes in handy.
  • High-end graphics card supported: With spacious interior, the Armor Revo can take on the most advanced graphics card(s) available today. Maximum card length: 12.9" (330 cm). Multi-graphics cards supported as well (3-way SLI). You are a unique individual, we understand. The Armor Revo Snow Edition not only set itself apart from the rest with the performance, but with its aesthetic supremacy as well.


All information provided courtesy of Thermaltake Technology Co @ http://www.thermaltakeusa.com/Product.aspx?S=1410&ID=2102#Tab0

  1. Introduction & Closer Look
  2. Closer Look: The Case
  3. Closer Look: Working Components
  4. Closer Look: Working Components (Continued)
  5. Specifications & Features
  6. Testing & Setup
  7. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1339468956   (xlweb1)