Welcome Stranger to OCC!Login | Register

SAPPHIRE NITRO+ Radeon RX VEGA 56 Limited Edition 8G HBM2 Review

» Discuss this article (3)

SAPPHIRE NITRO+ Radeon RX VEGA 56 Limited Edition 8G HBM2 Specifications:

3584 stream Processors
14 nm FinFET
5th Graphics Core Next (GCN)
1305 MHz Engine Clock
1572 MHz Engine Boost Clock
PCI-Express 3.0
2048 bit Memory Bus
HBM2 Memory Type
800 MHz, Effective
8 GB Size
BIOS Support
Maximum 4 Outputs
2x HDMI 2.0b
2x DisplayPort 1.4
5120×[email protected] Pixel DisplayPort Resolution
4096×[email protected] HDMI Resolution
OpenGL® 4.5
OpenCL 2.0
DirectX® 12
Shader Model 5.0
AMD CrossFire
FreeSync Technology
AMD Eyefinity
AMD Liquid VR Technology
AMD Xconnect ready
Universal Video Decoder (UVD)
DirectX™ 12 Optimized
Radeon VR ready Premium
HDR Ready
Frame Rate Target Control
NITRO Fan Check
NITRO Quick Connect system
Intelligent Fan Control III
Black Diamond Choke 4
Fuse protection
Precision fan control
Robust VRM Cooling
Radeon Chill
Radeon Relive
Tri-X fans
Two ball bearing
Vapor-X chamber
Form Factor
3 Part Slot Occupied
310(L)X 133(W)X 54 (H) Dimension /mm
Power Consumption
Windows 10Windows 7
System Requirement
750 Watt Power Supply (Suggestion)
3 x 8-pin AUX Power Connector
CD-ROM or DVD-ROM drive for installing software
PCI Express® 2.0 or higher version based PC is required with one X16 lane graphics slot available on the motherboard in order for the card to be compatible with.


SAPPHIRE NITRO+ Radeon RX VEGA 56 Limited Edition 8G HBM2 Features:

  • NITRO GLOW: The graphics card is more than just another component; it’s the beating heart of your gaming system. It should look as good as it costs. With tasteful shroud design augmented by RGB LEDs, each card is practically a piece of art.
  • TURBINE-X: SYSTEM FAN CONTROL: The brand-new Turbine-X system controls up to two external PWM fans mounted inside the PC’s chassis.
  • A dedicated hardware controller on the card intelligently adjusts the speed of connected fans based on the reads from five thermal sensors included on the PCB to improve the system’s overall airflow.
  • Vapor Chamber: To get the operational temperatures of the GPUs down to the targeted 70°C, SAPPHIRE has brought back its innovative vapor chamber technology made famous through SAPPHIRE’s Vapor-X series of graphics cards. Using this instead of the copper base on the GPU and HBM2 memory has lowered temperatures by up to 5°C. Heat is dissipated by a trio of efficient fans – two, slightly bigger, on the sides, running anticlockwise, and a smaller middle fan running clockwise to ensure optimal airflow.
  • CARD SUPPORT BRACKET: With NITRO + RX Vega Limited Editions, SAPPHIRE is including a useful accessory: the SAPPHIRE NITRO Gear Card Support Bracket. This elegant, black nickel-plated and heat-treated tool helps stabilize and maintain the correct position of longer graphics cards to prevent PCI-Express slot damage or PCB bending. Thanks to its smart mechanical design, the bracket doesn’t require any additional space and only touches the card by a movable knob with a rubber, soft top.

All information courtesy of Sapphiretech @ http://sapphirenitro.sapphiretech.com/en/Vega56LE.html#specifications

Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.3446419239   (xlweb1)