Welcome Stranger to OCC!Login | Register

Phanteks Enthoo Pro Review


Phanteks Enthoo Pro: Testing

Testing a chassis requires the computer to stay at idle and load for one hour. Doing so will give you an idea of what your computer may be like under stress. Normally your computer will not be running this hot, but we do not all live in cold weather or do similar things. A full stress test can give people the idea of what it can handle and whether or not heat gets trapped over time. The case is left with stock features to give you an idea of the temperatures without the need for extra fans. It's almost guaranteed to have a slight drop in temperature when more fans are added, but that will not be covered unless noted. I will be using Prime95 "small FFTs" for the CPU load and 3DMark Vantage "Extreme preset" for the GPU load for one hour. After an hour, the temperatures are recorded using HWMonitor in degrees Celsius (°C).

*All tests are conducted at 73 °F / 23 °C ambient room temperature.


Compared Cases:
















Looking at the charts, the Phanteks Enthoo Pro does well at idle. This is expected as none of the parts are very hot since idle wattage is fairly low in modern components. Under load, the Enthoo Pro is a little higher on the charts compared ot other chassis. This is nothing to worry about, but I would suggest adding fans on top for higher exhaust airflow. The chassis comes with pre-installed fans and is perfectly fine for one video card. Once again, additional fans are recommended to get the best results, but that can be said for just about any chassis.

  1. Phanteks Enthoo Pro: Introduction & Closer Look
  2. Phanteks Enthoo Pro: The Case
  3. Phanteks Enthoo Pro: Working Components
  4. Phanteks Enthoo Pro: Specifications & Features
  5. Phanteks Enthoo Pro: Testing: Setup & Results
  6. Phanteks Enthoo Pro: Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1591911316   (xlweb1)