Welcome Stranger to OCC!Login | Register

NZXT Source 210 Review


Closer Look:

With the packaging out of the way, we're left with the case, which sports a left-side panel with a 120mm fan hole. Looking at the front of the case, we appear to have the capability to take on up to three 5.25" devices. Power and reset switches, as well as I/O connections, are also present on the front. Moving on, we have the right-side panel of the case, which, according to the back of the box, has 20mm of space between the back of the side panel and the motherboard tray. Bringing up the rear, we have the back of the case, which sports a single fan and a bottom-mounted PSU.

















The rear of the case also appears to have some sort of water cooling capability via punch-out holes. However, no grommets are included for these holes. The top of the case sports two fan holes, which can accommodate either two 120mm or 140mm fans. The bottom of the case sports rubberized feet, which would prevent sliding on a smooth surface. The bottom is also capable of accepting a 120mm fan. Unlike some cases, however, no fan filters are included for the bottom or the front of the case. Here we have a close up of the front panel I/O connections, which consist of headphone and microphone connections as well as two USB 2.0 ports.





So far this case looks like it has a lot of room for expansion, although not much is included from the get-go. Just how much is actually on the inside of this case?

  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look: Working Components
  4. Specifications & Features
  5. Testing: Setup and Results
  6. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1541171074   (xlweb1)