Welcome Stranger to OCC!Login | Register

In Win Buc Review


Closer Look:

Starting with the left side panel, we have what appears to be a keyed door that opens to allow access into three of the internal hard drive bays, enabling you to swap drives. Additionally, the side panel supports up to two 120mm fans, which are optional in the default configuration. The front of the case sports an IN WIN logo that can be lit up, if desired. Also on the front panel are some I/O plugs, which consist of one eSATA, two USB 2.0 ports, and front MIC and Audio out connections. Lastly, we have our right side panel. Both side panels are removable once both of the latch catches have been released on the side of the panel you wish to remove.















As you probably noticed, yes that is a USB 3.0 cable protruding from out of the top panel. The back of the case also features seven expansion slots and water cooling capabilities via the two rubber grommets. The top panel sports a 120mm fan and there are a total of three fans included with this case, which is plus. Also on the top panel is our lone USB 3.0 port and its accompanying tray that allows you to sit a hard drive dock on top of the case.




Last, but certainly not least, we have our feet, which consist of two rubber circles on the front and two rubberized feet in the back. Between the rubber feet in the rear is a fan filter for your PSU.



Well this case does certainly have a few nice features, but what else is in store on the inside?

  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look (The Working Components)
  4. Specifications & Features
  5. Testing: Setup and Results
  6. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1296188831   (xlweb1)