Welcome Stranger to OCC!Login | Register

Apevia X-Supra G Type Review

Former staff writer    -   February 28, 2008
» Discuss this article (1)

 

Closer Look:

Opening up the side, Apevia gets its first 'ding'. Apevia used masking tape to hold the Molex connector to the window fan to prevent any scratches to the window during shipping. They possibly should look at another means to secure the connector (stronger tape, maybe?), ship with some type of foam wrapped around the connector, or remove the fan altogether for shipping.

 

 

 

 

 

 

 

 

The interior of the X-Supra features five 3.25” drive bays, two 3.5” External and three 3.5” internal drive bays that are tool-less. The external drive bays utilize a sliding lock to hold the drives in place, while the three internal 3.50” drive bays use a rail system to secure the drives.

 

 

 

 

The rear of the case is home to the 120mm exhaust fan and the tool-less PCI holding system.

 

 

Last but not least, are the accessories that ship with the case, consisting of the owners manual and box with the internal 3.5” drive rails and bag of screws/standoffs.

 




  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look (Working Components)
  4. Installation
  5. Specifications & Features
  6. Testing
  7. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0251631737