Welcome Stranger to OCC!Login | Register

Apevia X-Supra G Type Review

» Discuss this article (1)


Closer Look:

The front of the case is refined and classy looking. The five 5.25" and two 3.5" Piano black faceplates, strike a zen like abstract against the brushed silver aluminum bezel. Placed on the top closest to the front are the power and reset buttons, as well as the fan controller. Further back are the front panel audio/USB/Firewire connectors. With the front bezel removed, the front grill shows where the 120mm intake fan goes if it had of been included.









The side of the case showcases the windowed side panel giving a clear view to the guts of your case. Make sure to take care of any wiring details and keep things nice and tidy for all to see. Mounted in the window is a 120mm fan to aid in cooling. Apevia did a nice job with the intake on the window, as well as including a mesh filter to help reduce the dust bunnies in the case.



Heading out to the rear, the 120mm exhaust is visible as well as the PCI slots fully complimented with covers. The individual PCI hold downs are also visible, in blue.



The last side is a blank canvas for you to make the X-Supra yours.


  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look (Working Components)
  4. Installation
  5. Specifications & Features
  6. Testing
  7. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1462368965   (xlweb1)