Welcome Stranger to OCC!Login | Register

XFX Double Dissipation R7750 Review

BluePanda    -   June 27, 2012
» Discuss this article (2)

Lowest Prices

Testing:

Testing of the XFX Double Dissipation R7750 will consist of running it and comparison cards through the OverclockersClub.com suite of games and synthetic benchmarks. This will test the performance against many popular competitors. Comparisons will be made to cards of a range of capabilities to show where each card falls on the performance ladder. The games used are some of today's newest and most popular titles, which should accurately provide an idea of how the cards perform relative to each other.

The system specifications will remain the same throughout the testing. No adjustment will be made to the respective control panels during the testing, with the exception of the 3DMark Vantage testing, where PhysX will be disabled in the NVIDIA Control Panel, if applicable. I will first test the cards at stock speeds, and then overclocked to see the effects of an increase in clock speed. The cards will be placed in order from highest to lowest performance in each graph to show where they fall by comparison. All NVIDIA comparison cards will be using the 301.42 drivers; AMD cards will be using Catalyst 12.4 drivers.

  • Processor: Core i7 2600K @ 4.4 GHz 100 x 44
  • CPU Cooling: Corsair H100
  • Motherboard: GIGABYTE Z68AP-D3
  • Memory: Mushkin 991996 Redline PC3-17000 9-11-10-28 16 GB
  • Video Card: XFX Double Dissipation R7750
  • PSU: Antec TruePower New TP-750
  • Hard Drives: Corsair Force GT 240 GB SSD
  • Case: Corsair 650D
  • Optical Drive: N/A
  • OS: Windows 7 Pro 64-Bit SP1

 

Comparison Video Cards:

 

Overclocking:

  • XFX Double Dissipation R7750 — Core 1000 MHz, Memory 1250 MHz

Overclocking an AMD GPU is about as simple as it can get. I simply used Catalyst Control Center to raise the GPU and memory clock speeds using the sliders. As with any overclocking using CCC, the PowerTune slider was slammed all the way to the maximum of +20%. With such high stock clocks, it wasn't easy to push the card much further – maxing out the sliders was definitely not as good an option as you might do with lower factory-clocked cards. It was pretty easy to push the card up to 1000/1250 and run fully stable.

 

 

Maximum Clock Speeds:

Testing for the maximum clock speed consists of looping Unigine 3.0 for 30 minutes; each to see where the clock speeds fail when pushed. If the clock speed adjustment fails, then the clock speeds are adjusted and the test is re-run until each card passes the testing.

 

 

  • Gaming Tests:
  1. Metro 2033
  2. Batman: Arkham City
  3. Battlefield 3
  4. Sid Meier's Civilization V
  5. Unigine Heaven Benchmark 3.0
  6. DiRT 3
  7. Mafia II
  8. 3DMark 11
  • Usage:
  1. Temperature
  2. Power Consumption



  1. Introduction & Closer Look
  2. Closer Look: The Video Card
  3. Specifications & Features
  4. Testing: Setup & Overclocking
  5. Testing: Metro 2033
  6. Testing: Batman: Arkham City
  7. Testing: Battlefield 3
  8. Testing: Unigine Heaven Benchmark 3.0
  9. Testing: Sid Meier's Civilization V
  10. Testing: DiRT 3
  11. Testing: Mafia II
  12. Testing: 3DMark 11
  13. Testing: Temperatures
  14. Testing: Power Consumption
  15. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0251019001