Welcome Stranger to OCC!Login | Register

Ultra X-Pro & X-Finity 800watt Power Supplies


Closer Look Continued (Measurements):
Here are the measurements of the PSUs and its cables!

Power Supply Length
Ultra X-Pro & X-Finity 800W 18.5CM
PCP&C 750W 18CM
Etasis 850W 18CM
Apevia 680W Iceberg 16.75CM
Ultra X-Connect 500W 15.6CM
Generic 400W 14CM

Yep, you read that right. It's massive in comparison to other power supplies! Be sure to measure out 18.5CM and another 5CM for the cables (23.5CM) from the edge of the case to your optical drives. You might have some spacing issues.

As for the cables. All of them are about 50CM long from the PSU to the first connector. So the second connector on the SATA line will be 17CM away from the first. The Molexs and floppy connectors are spaced about 16CM away from each other. Should be plenty long for most cases.

Well, installing a PSU is pretty easy. It took some muscle trying the squish the thing into my already packed case, but it did fit. Once again, make sure you have room!

All you have got to do is screw and hook up your connections. Easy!

  1. Introduction & Closer Look (X-Pro)
  2. Closer Look Continued (X-Pro & X-Finity)
  3. Closer Look Continued (X-Finity & Miscellaneous)
  4. Closer Look Continued (Miscellaneous)
  5. Closer Look Continued (Measurements) & Installation
  6. Specifications
  7. Testing
  8. Testing Continued & Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1358830929   (xlweb1)