Ultra X3 800 Watt Modular ReviewMakaveli - December 17, 2007
» Discuss this article (0)
To correctly install this power supply, first, power down and unplug your computer. Remove your current power supply from your case. Next, attach the power supply back plate that was included with your case and put the X3 into its correct spot within your case. Then, attach only the cables you need to power your system and plug in the power supply. Make sure that you read the labels on either end of the cables to make sure you plug specific ends into the X3.
With everything correctly installed, let’s power up the computer and run some tests!