Ultra X3 600 watt Modular ReviewMakaveli -
» Discuss this article (0)
Installing the Ultra X3 is almost like installing any other power supply. First, remove your current power supply. Then, depending on your case, attach the back plate included with your case to the X3 and place it into its new home. Once the X3 is installed securely into place, attach the necessary cables and connect them to your hardware. Be sure to read each end of the cables, because they tell you which end goes to the power supply. After everything is plugged in, go ahead and power up your system!
Everything is installed, so that means we’re almost ready to test the Ultra X3!