Welcome Stranger to OCC!Login | Register

Thermaltake Kandalf LCS Case

Former staff writer    -   April 5, 2007


Closer Look:

Liquid Cooling System:

The radiator is 360mm and attached to the front bezel door. It contains three 120mm fans, of which, the center fan is lit with LEDs. The tubing enters the bottom of the case through an access hole in the front bezel. The pump is the Superb P500, which is 12V and flows 500 L/hr - enough to cool all chipsets attached to the motherboard. Attached to the pump is a 350 cc reservoir.

 


The water block is made of 100% copper, has a built in LED and is compatible with Intel P4 and LGA 775, as well as AMD K7 and K8 chipsets.

 


The tubing used is 3/8” and is UV. I would say that it is approximately 5’ long and more than enough to supply the whole case.


Included with the case are all the accessories to connect the water block to your preferred chipset, be it AMD or Intel.

 

 




  1. Introduction & Closer Look
  2. Closer Look Continued (The Case)
  3. Closer Look Continued (Working Components)
  4. Closer Look Continued (Liquid Cooling)
  5. Closer Look Continued (Fluids and Fans)
  6. Installation
  7. Installation Continued (Liquid Cooling System)
  8. Specifications and Features
  9. Testing
  10. Testing Continued (Temperatures)
  11. Testing Continued (Motherboard and CPU)
  12. Testing Continued (Case Temperatures)
  13. Testing Continued (Air Flow)
  14. Testing Continued ( Inside Air Flow)
  15. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0391981602