Welcome Stranger to OCC!Login | Register

Thermalright Ultima 90 Review

» Discuss this article (0)

Closer Look:

The Ultima 90 is constructed of aluminum fins, six heatpipes and a nickel base. The two holes to the left and right of the heatpipes, on the fins themselves, are for the mounting clips that will hold your fan.










Since the Ultima 90 can be used for both Intel and AMD systems, mounting clips are provided for both platforms. The rear mounting plate is universal and contains pre-drilled insert holes for the fastening attachments.




Also supplied are the mounting brackets for either a 90mm or 120mm fan and heatsink paste. Finally there is an instruction manual that contains instructions for mounting the Ultima 90 on either platform.


  1. Introduction & Closer Look
  2. Closer Look (Continued)
  3. Installation
  4. Specifications & Features
  5. Testing (Setup & Intel Benchmarks)
  6. Testing (AMD Phenom Benchmarks)
  7. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.1102838516   (xlweb1)