Ahh!! Overclocking is where the fun begins. First I am going to see how far I can push these modules on stock volts and then I'll raise the volts a bit and push them more. I will be showing you the results from the highest, stable overclock that I was able to achieve at default volts that would pass all of the tests in our testing suite. Even though my processor runs at 2.66 Ghz stock, it has been tested and runs benchmarks at 3.80 Ghz in this setup, so I know this is not to be my limiting factor in the ram overclocks. The 1000 MHz ram tests were done with a fsb (front side bus) speed of 333. Now I will show the results with a fsb of 350 and memory speeds of 1050 MHz.
Cpuz
Memory at 1050 MHz
Cachemem
Higher is Better
Higher is Better
PCMark05
Higher is Better
Higher is Better
SiSoft Sandra
Lower is Better
Higher is Better
Higher is Better
Lower is Better
Far Cry
Higher is Better
Higher is Better
Higher is Better
That was the highest speed at which the Super Talent ram would complete all of the benchmarks in our suite at its default voltage of 2.2 volts. As you can see, bumping up the memory speeds gives a nice boost to all the scores.