Welcome Stranger to OCC!Login | Register

Super Talent T1000UX2G5 DDR2-1000 (2 x 1 GB) Dual Channel Memory Kit

Former staff writer    -   March 29, 2007


Installation:



The installation is pretty straight forward. Always, when you are working inside of your computer, the first thing to do is disconnect the power. Removing or adding components to your motherboard with the power on can, and usually will, result in damage. So, with the power disconnected, it is a simple matter of removing my current modules by pressing down on the tabs at either end of the modules which lifts them up. Then I can grab them and pull them completely out of my system. Putting the new Super Talent modules in is just a reverse of the process. Line the modules up with your slot making sure to note that there is a notch in the bottom of the slot which only lets them go in one way. Once aligned, simply press down by placing your fingers on the top of the modules near the ends. Press them gently down until the tabs snap back in the upright postion, thereby locking the modules in place.



With that step out of the way, we are ready to move on to the benchmarks.

Specifications:



  • 2x 240-pin DDR2 DIMMs
  • Non-ECC, Unbuffered
  • 2GB kit (2x 128Mx64)
  • DDR2-1000, 5-5-5-15 latencies
  • Dual rank • Chip Architecture: 2x 16 chips, 64Mx8
  • Cast aluminum high-efficiency (HE) heatspreader
  • SPD*: DDR2-800, 5-5-5-15 latencies
  • Made in USA
  • Super Talent Lifetime Warranty



  1. Introduction and Closer Look
  2. Installation and Specifications
  3. Testing and Benchmarks and Apps
  4. Testing and Benchmarks and Apps Continued
  5. Overclocking
  6. Overclocking Continued
  7. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0547511578