Welcome Stranger to OCC!Login | Register

Antec SpotCool

Propane    -   August 2, 2007
» Discuss this article (0)

Installation:

The installation of the Spotcool is very simple, and very customizable, but could be a nuisance if you already have a full case or a small case. To install, all you have to do is remove a screw out of the motherboard or case and then use the screw to sandwich the Spotcool down. Then the neck of the Spotcool can be moved around to provide cooling where it is most needed. Don't forget to plug in the 3 pin connector, as that's how the fan gets power.

 

 

 

 

 

Specifications:

  • Quiet and Flexible 3-speed blue LED fan.
  • Mounts on your motherboard or elsewhere to cool your RAM, expansion cards, etc.
  • High, Medium, Low fan settings
    • 22.2CFM/18.2CFM/15.3CFM
    • 32.7dBA/26.6dBA/23.2dBA
    • 3000RPM/2500RPM/2000RPM
  • 212x89x30mm
  • 94.5grams



  1. Introduction & Closer Look
  2. Installation & Specifications
  3. Testing
  4. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0259189606