Welcome Stranger to OCC!Login | Register

SilenX Effizio EFZ-120HA5 Review

airman    -   May 27, 2012
» Discuss this article (7)

Lowest Prices

Testing:

Testing of this heat sink will involve applying a load simulated by Prime95, using small FFTs in stock and overclocked scenarios, where both idle and load temperatures will be recorded. Load temperatures will be the maximum value displayed in RealTemp after running eight threads in Prime95 for one hour, and idle temperatures will be the minimum recorded value by RealTemp with no computer usage during a period of one hour. The temperature values for each of the four cores will be averaged and displayed in the graphs below. The ambient temperature is held at a constant 23°C throughout testing of the SilenX Effizio EFZ-120HA5, as well as with the comparison units. All the data shown in the graphs below is in degrees Celsius. The included thermal paste from SilenX will be used during testing, and thermal pastes on other heat sinks from their respective manufacturers will be used. The fans on each cooler will be run at full-speed for these tests.

Testing Setup:

 

Comparison Heatsinks:

 

 

 

 

We see here that under low heat loads, the SilenX Effizio EFZ-120HA5 performs on par with the DEEPCOOL Ice Wind Pro, but seems to get heat-soaked at higher loads where its performance falls off a bit. These results are most likely due to it having less mass than some of the larger coolers as well as a lower flow rate from its single fan.




  1. Introduction & Closer Look
  2. Closer Look: Continued
  3. Specifications & Features
  4. Testing: Setup & Overclocking
  5. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.1454629898