Welcome Stranger to OCC!Login | Register

Sapphire HD 7950 FleX Dual-X Edition 3GB Review

   -   
» Discuss this article (13)

Lowest Prices

Testing:

Power consumption of the system will be measured at both idle and loaded states, taking into account the peak voltage of the system with each video card installed. I will use Unigine's Heaven Benchmark version 2.5 to put a load onto the GPU using the settings below. A 15-minute load test will be used to heat up the GPU, with the highest measured temperature recorded as the result. The idle results will be measured after 15 minutes of inactivity on the system. With dual-GPU setups, the two core temperatures will be averaged.

Settings

  • Unigine 3.0 Heaven Benchmark
  • 1920x1200 Resolution
  • 8x AA
  • 15-minute load test
  • 15-minute idle test
  • Measurement is in watts

 

 

 
 

 

The system required just over 100 watts at idle for stock and overclocked situations, which is nice. Overclocked, the wattage requirement slightly exceeds that of the GTX 680.




Related Products
Random Pic
© 2001-2016 Overclockers Club ® Privacy Policy
Elapsed: 0.0330028534