RAIDMAX Orion Case Review
BluePanda - October 25, 2012» Discuss this article (2)
Testing:
Testing the Raidmax Orion required pushing my hardware to heat things up! Testing involved recording temperatures for the CPU, GPU, chipset, hard drives, and overall system during idle and load phases. Recently, OCC upgraded to the ForceGT 240GB SSD from Corsair and has removed the HDD temps from case reviews. Thus, HDTune is no longer a part of the case benchmarking process.
Load was simulated by running Prime95’s small FFTs along with 3Dmark Vantage looping for one hour. The maximum temperatures were recorded using HW Monitor. It is important to note that each case is tested from its factory setup, including location of fans, unless otherwise noted.
Testing Setup:
- Processor: Core i7 2600K @ 4.4 GHz 100 x 44
- CPU Cooling: Noctua NH-U12P SE 1366
- Motherboard: GIGABYTE Z68AP-D3
- Memory: Mushkin 991996 Redline PC3-17000 9-11-10-28 8 GB
- Video Card: XFX HD 7970
- PSU: Antec TruePower New TP-750
- Hard Drive: Corsair ForceGT 240GB
- Optical Drive: N/A
- OS: Windows 7 Pro 64-Bit SP1
Comparison Cases:
- Corsair 600T
- Corsair 650D
- Thermaltake Overseer RX-I
- COUGAR Evolution
- COUGAR Solution
- Thermaltake Commander MS-I
- Bitfenix Raider
- Corsair 300R
- Corsair 550D
- Enermax Fulmo GT
- Cooler Master HAF XM
- Corsair C70
- XION XON-980
- CM Storm Scout 2
Results:
The temperatures under load were rather impressive! Though the same can't be said for the idle temps, the temperatures were right in the middle of the large pack of cases – so in reality there's no complaint. The CPU and chipset load temperatures being so low are likely due to the three fans in the case. The CPU cooler gets the help from the rear 120mm fan as well as the top 120mm fan getting rid of heat. Overall it performed quite well.

Facebook
Twitter
YouTube
RSS Feeds