Welcome Stranger to OCC!Login | Register

Apevia X-QPack 2 Aluminum Case

Former staff writer    -   August 21, 2007
» Discuss this article (6)

Closer Look:

Working Components:

A removable motherboard tray is supplied for easy installation. The chassis comes complete with one rear 120 mm UV sensitive LED fan and the front of the chassis has an 80 mm UV sensitive fan. Included is a 500W standard size Power Supply that houses a 120 mm fan as well.

 

 

 

 

 

The hard drive tray is removable and can hold up to 2 hard drives. You will also need to remove it to install your CD/DVD ROM drive.

 

 

The front Bezel can be removed by unscrewing the two fasteners inside the chassis and gently pushing its four tabs to the side. Taking a closer look at the bezel itself, you will see the blanks to add two CD/DVD ROM drives and one floppy drive. The handle is constructed of steel and is spring activated to automatically retract. All your connectors for the power panel are attached to the rear of the bezel and include the USB, IEEE 1394, temperature probes for the CPU and Hard Drive and a power cord for the LEDs.

 




  1. Introduction & Closer Look
  2. Closer Look (The Case & Working Components)
  3. Closer Look (Working Components Continued)
  4. Installation
  5. Specifications & Features
  6. Testing
  7. Testing (Motherboard , CPU & Case Temperatures)
  8. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 1.0309829712