PowerColor HD5770 Crossfire Reviewgotdamojo06 - November 4, 2010
» Discuss this article (8)
Temperature testing will be accomplished by loading the video card to 100% using MSI Kombuster which is paired with MSI's afterburner overclocking utility for temperature monitoring. I will be using the stability test set to a resolution of 1920 x 1200 using 8xAA. I will use a 15 minute time frame to run the test ensuring that the maximum thermal threshold is reached. The fan speed will be left in the control of the driver package and video card's BIOS for the first test, with the fan moved to 100% to see the best possible cooling scenario for overclocking. The idle test will be a 20 minute cool down with the fan speeds left on automatic.
- Monitoring with MSI Afterburner
- GPU Stability test in MSI Kombuster
- 15 minute load duration
- 15 minute idle duration
- Temperature measured in degrees Celsius
Lower = Better
The single slot cooling solution worked quite well during the stock speeds testing, putting the cards in the middle of the pack. However, as the clock speeds were raised, so did the temperatures, which put the cards at the higher end of the scales.