Installation
Doesn’t get much easier than this to install your new power center. Simply unplug, and unscrew the old one, and screw in this new one, then rewire accordingly. Using the standard 4 screw pattern, you will need to hold onto the power source while fitting the first couple screws. After you have it secured to the chassis, you can simply route the wires, and then plug it into your devices, and you are once again ready to roll.
Specifications
Input
| AC Input Range |
115/230 Vac |
| Frequency |
60/50 Hz |
| Inrush Current |
30A/115Vac, 60A/230Vac |
Output
| DC Output Voltage |
Regulation |
Max. Current |
Total & Combined |
| +12V1DC |
+/- 5% |
20A |
528W 630W |
| +12V2DC |
+/- 5% |
20A |
|
| +5VDC |
+/- 5% |
30A |
170W |
| +3.3VDC |
+/- 5% |
24A |
|
| -12VDC |
+/- 10% |
0.5A |
20W |
| +5VDC |
+/- 5% |
3.0A |
|
| -5VDC |
+/- 10% |
0.5A |
|
Total Power: 650Watts
| Efficiency |
70% at full load, normal line Minimum 16ms at full load, 115Vac |
| Hold Up Time |
Maximum 20ms at full load, normal line |
| Power Good |
Minimum 140, 000 Hours at 75% load 25°C ambient |
| Temperature |
0°C-50°C |
| Storage temperature |
-40°C – 70°C |
