Welcome Stranger to OCC!Login | Register

NZXT Precise 1000W Power Supply

robgs    -   May 14, 2007


Installation:

The installation of the power supply unit is fairly straight forward depending on the system components you have.  Just insert the PSU into the power supply bay in your case and secure it with the 6-32 screws supplied.


Then just start plugging in the components that you have on your system.  With my system, I started with the ATX cable.  As with all of the cables that you connect, make sure that the connector snaps into place before you consider it connected.



Next, I plugged in the RAID array with one of the supplied SATA cables.



Then I connected the dual 12VDC PCI Express VGA connectors to my video card.



Finally I installed the single molex to my DVD-ROM and the installation is complete.  Before I start using the system, I will do a double check on the supplied power coming from each rail in the testing section.




  1. Introduction & Closer Look
  2. Closer Look Continued
  3. Installation
  4. Specifications & Features
  5. Testing
  6. Testing Continued
  7. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.1209270954