Welcome Stranger to OCC!Login | Register

NZXT IU01 Internal USB Expansion Review

Indybird    -   February 16, 2010
» Discuss this article (4)

Lowest Prices

Installation:

The NZXT IU01 Installation is as easy as it gets. The instruction booklet is very clear, but most users will find that they won't need it. All you have to do is open up your case, stick the Velcro on, locate your motherboard's internal USB ports, connect the upstream internal USB cable to the motherboard, connect the power to a spare Molex connection and then finally connect all of your USB devices. Once you've done all of that, you're all ready to turn your computer on. Once windows starts up it will immediately recognize the hub and all of the attached devices.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I chose to install it in the bottom the case as far from the motherboard as possible, to avoid any height conflicts with future expansion cards.

Features:

  • 6 Internal USB expansion
  • 2 External USB expansion
  • Dedicated power from power supply
  • Plug and use, no drivers needed



  1. Introduction & Closer Look
  2. Installation & Features
  3. Testing
  4. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0305540562