Welcome Stranger to OCC!Login | Register

NZXT Duet Case



The first step for this installation is to install the motherboard, but before we can do that, we need to install the mounting standoffs to the back pane.





Once the motherboard is installed, to make the cable routing easier later on, I installed the case switches and LED wires as well as the front convenience port USB and firewire connectors.



Then to install my sound and video cards, I removed the associated PCI knock-out plates from the back of the case. It’s a real shame that these knock-outs cannot be reused but at the very least if you take out the wrong ones you’ve just increased the interior air conditioning.


The next step is to install the power supply into the bay provided. In order to conserve space and to allow for the use of an ATX size motherboard the power supply bay is located near the front of the case and the power cord is jumpered to a connector at the back of the case.


  1. Introduction and Closer Look
  2. Closer Look Continued
  3. Installation
  4. Installation Continued
  5. Specifications and Features
  6. Testing
  7. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.0537130833   (xlweb1)