Facebook
Twitter
YouTube
RSS FeedsMushkin Enhanced Joule 800W Power Supply Review
paulktreg - March 9, 2011» Discuss this article (2)
Specification:
Review Sample: Mushkin Enhanced Joule 800W Power Supply, Part Number MKNPSJL800.
Ratings Table:
|
Mushkin Enhanced Joule 800W (MKNPSJL800) Power Supply Specification Table
|
||||||
|
AC Input
|
115 – 230V 12 – 6A 50 – 60Hz
|
|||||
|
DC Output
|
+3V3
|
+5V
|
+12V1
|
+12V2
|
-12V
|
+5VSB
|
|
Maximum Load
|
26A
|
26A
|
32A
|
32A
|
0.8A
|
3A
|
|
Maximum Combined Wattage
|
150W
|
768W (64A)
|
20W
|
|||
|
780W
|
20W
|
|||||
|
800W
|
||||||
System Protection:
Protection Features:
If the power supply latches into a shutdown condition due to over-current, over-voltage or short-circuit, the power supply will return to normal operation only after the fault has been removed and the power supply is turned off for 30 seconds or the AC power cord has been removed for 30 seconds.
Over-Current Protection:
The power supply DC outputs are protected from supplying current above the maximum ratings and when output power is between 100-150% of rated specification. With the exception of the +5VSB output, all DC outputs are latched of in the event of an over-current condition.
Over-Voltage Protection:
The over-voltage sense circuitry and reference reside in packages that are separate and distinct from the regulator control circuitry and reference. No single point fault is able to cause a sustained over-voltage condition on any or all outputs. The power supply provides latch-mode over-voltage protection as follows:
+3.3V output is between 3.6-4.2V
+5V output is between 5.8-6.3V
+12V output is between 14.0-17.0V
Short-Circuit Protection:
The power supply DC outputs are protected from damage due to faults, when any output shorts to ground. In the event of a short-circuit on any output , all outputs shall be disabled and remain disabled until the short condition is removed and the power supply is powered off and back on.
Safety & Agency Approvals:
TUV, UL, CE, CB, FCC and BSMI.
Power Supply Physical Characteristics:
|
Mushkin Enhanced Joule 800W (MKNPSJL800) Power Supply Physical Characteristics
|
|||
|
Weight
|
Length
|
Width
|
Height
|
|
5.3lbs/2.4kg
|
6.3in/160mm
|
5.9in/150mm
|
3.4in/86mm
|
Power Supply Connectors:
|
Mushkin Enhanced Joule 800W (MKNPSJL800) Power Supply Connectors
|
|
|
Connector Type
|
Qty
|
|
Motherboard 20/24 Pin
|
1
|
|
EPS12V 8 Pin
|
1
|
|
ATX12V/EPS12V 4+4 Pin
|
1
|
|
PCI-E 6+2 Pin
|
4
|
|
SATA Power 15 Pin
|
8
|
|
Peripheral 4 Pin
|
4
|
|
FDD 4 Pin
|
1
|
Power Supply Cable Lengths:
|
Mushkin Enhanced Joule 800W (MKNPSJL800) Power Supply Cable Set
|
||
|
Cable Type
|
Cable Length/Connector Spacing’s
|
Qty
|
|
Captive
|
PSU > 20" > Motherboard 24 Pin
|
1
|
|
Captive
|
PSU > 21" > EPS12V 8 Pin
|
1
|
|
Captive
|
PSU > 22" > ATX12V/EPS12V 4+4 Pin
|
1
|
|
Captive
|
PSU > 22" > PCI-E 6+2 Pin > 6" > PCI-E 6+2 Pin
|
2
|
|
Captive
|
PSU > 22" > SATA > 6" > SATA > 6" > SATA > 6" > SATA
|
2
|
|
Captive
|
PSU > 22" > Periph. > 6" > Periph. > 6" > Periph. > 6" > Periph. > 6" > FDD
|
1
|
Features:
Exactly as printed on the box.
- Conforms with ATX +12V V2.3 / EPS V2.92 standards
- Full range 90-264VAC input with 0.99PF Active PFC
- Quad +12V rails
- 100,000hr MTBF
- High-reliability (120,00hr MTBF) thermally-controlled Nano-Tek bearing fan
- 80 Plus Silver certification with efficiency up to 88%
- EuP-ready
- <1W standby power consumption
- Supports Energy Star 4.0 specification
- 2002/95/EG RoHS compliance
- Combo cables with SATA and peripheral connectors
- Adaptable 20+4 pin main motherboard connector
- Adaptable 4+4-pin +12V/EPS connector
- Adaptable PCIe 6+2-pin graphics connector
- High density mesh sheathing protects individual wires
