Welcome Stranger to OCC!Login | Register

Mushkin HP3 10666 DDR3 Memory Review

ccokeman    -   October 1, 2007
» Discuss this article (3)

Installation:

Installing these modules is no different than any other module. The first thing to do would be to power down the system. Press down on the module release lever and pull the modules free. To install the new modules, index the module correctly into the DIMM slot and push down the module on both ends to lock it into place. Verify that the clips are in and secure the modules. When adding new hardware to your system, it is a good idea to clear the CMOS to make sure that all of the settings will be reset to factory defaults. This way, you have no issues on system restart. Now you are ready to hook your system back up, power it up and change the settings in the BIOS. Reboot and enjoy!

 

 

 

 

Specifications:

 

Part number 996574

Frequency:
1333MHz
Latency:
6-7-6-18
Voltage:
1.7-1.8V
Module:
128Mx64
Chip:
Unbuffered
Pins:
240
Chip:
64Mx8

 

Features:

  • Enhanced Timings
  • Frostbyte Technology Heat Spreaders

 




  1. Introduction & Closer Look
  2. Installation & Specifications
  3. Testing: Setup, CPU-Z, Task Manager
  4. Testing: PCMark05 Pro, SI Sandra XII
  5. Testing: Cachemem , Farcry
  6. Overclocking
  7. Overclocking: Sandra XII
  8. Overclocking: CacheMem, Far Cry
  9. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0267019272