Welcome Stranger to OCC!Login | Register

MSI B150M Mortar Review

   -   
» Discuss this article (0)

Lowest Prices

MSI B150M Mortar Closer Look:

MSI's Click BIOS has evolved over the past few years to become a truly easy-to-use implementation of its UEFI BIOS. The move to support for 6th Generation Intel processors and supporting chipsets brings along another revision to Click BIOS 5. The interface has and continues to improve with the addition of an all new EZ Mode, which allows the end user to work from a minimalist interface rather than the whole enchilada. Click BIOS 5 is a UEFI BIOS from AMI that is an ACPI 5.0, PnP1.0a, SM BIOS 2.8, and DMI 2.0 multi-language BIOS. A single 64MB IC contains the BIOS. This is a change from the trend we have been seeing with dual BIOS chips to serve as a backup when a flash goes bad. However, MSI has added USB BIOS Flashback functionality to this board, allowing you to flash the BIOS with only power, a USB flash drive with the BIOS installed, and pushing the USB BIOS Flashback+ button on the bottom edge of the PCB.

Let's start with a look at the EZ Mode of MSI's Click BIOS 5. At first look, it does not look like there is a lot to manage, but when you start hitting the radio buttons, the functionality just jumps off the screen. Next to the temperature reading is the XMP profile button used to set up the XMP profile for your DDR4 memory while in the EZ Mode. Along the top of the screen are the current operating specifications of the package. Along the left side of the Click BIOS 5 page are a series of buttons that allow you to look at the current state of the CPU, memory, storage drives, fans, and a help menu. Under the help menu button, there is the M-Flash button used to flash the BIOS. You can set up the operating characteristics of the board for the most part from this menu.

 

 

 

Settings: The first section is Settings. Here you can see that MSI has redone the interface with a bolder image and HD script. Here you can check the system info under System Status. The Advanced tab is where you manage the IGP settings, enable or disable Intel Rapid Start and Smart Connect Technologies, and set up the power management features. The Boot section is where you manage the boot priority of the installed storage devices. Security is where you can set up an admin password and configure the chassis intrusion settings, while Save and Exit allows for a reset to factory defaults or the acceptance of any system changes.

 

 

 

OC: This section is the area where the performance of the installed hardware can be managed: bclock adjustments; voltages for the CPU, memory, and control circuits; memory speed and timings; bclock strap settings; and DRAM ratios. This area is fairly robust and the window to the right gives a brief description of the line item. There are several different options here, but overclocking with the B150 chipset is not an actual option. Tweaking the memory timing, locking the multipliers, and hard setting voltages are your only real tools.

 

 

 

M-Flash is where the user can flash or back up the latest BIOS revisions. Through the course of testing this board, I flashed the latest BIOS using the M-Flash tool. Using it has proven to be anti-climactic, since as in the past it just worked as intended: put the BIOS file on a flash drive, chose your file, then flash and reboot.

 

 

OC Profile: This section allows the user to save up to six distinct profiles, which can be named individually so you can at least remember what each profile was. This way you get easy access without having to reconfigure the BIOS each time you want to change to a more or less aggressive profile. You can save profiles to or from a flash drive for added profile capacity.

 

 

Hardware Monitor: This section opens to show configurable fan profiles and controls for the five onboard PWM fan headers. The current voltages supplied by the power supply are registered on the bottom of the window in small charts. CPU and system temperatures are in the upper right of the window on this page.

 

 

Board Explorer is a pretty cool feature that visually shows which parts of the PCB are occupied with hardware and highlights them in bright red. Using a mouse to roll over the Z170A Gaming M7 image, you get a brief explanation or picture of the items that are installed.

 

 

As a UEFI BIOS, you get full mouse and keyboard support so that you can freely navigate the menus and sub-menus in Click BIOS 5. I found that navigating through this BIOS with both a mouse and keyboard proved to be just as easy as operating within the main operating system. One cool thing I noticed right away was how the Arsenal Series B150M Mortar imaging was used in the BIOS main window. A nice touch.




Related Products
Random Pic
© 2001-2017 Overclockers Club ® Privacy Policy
Elapsed: 0.0322880745   (xlweb1)