Welcome Stranger to OCC!Login | Register

Logitech X-240 2.1 Speaker System

» Discuss this article (9)


I have to note that the X-240 system can either be used as a stand alone personal music device amplifier or it can be used as a PC speaker system. In either case the installation is much the same. First, plug the satellite speakers into the back of the subwoofer.


Next, the green stereo jack is plugged into the speaker output of your computer. Of course, if you were going to use the X-240 as a personal music device amplifier, then you wouldn’t have to do this.

At this stage, your system is set up. You can now enjoy all the pounding bass and sound that this system will deliver from your computer.

To install the personal music device, you must install the proper bracket into the pull out drawer of the control center.


Then attach the small headphone jumper supplied, from your music device to the input on the control center. Now your music device is ready to use.

  1. Introduction & Closer Look
  2. Closer Look Continued
  3. Installation
  4. Specifications & Features
  5. Testing
  6. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.0275390148   (xlweb1)