Welcome Stranger to OCC!Login | Register

Lapworks Attaché Laptop Stand Review

Propane    -   March 11, 2008
» Discuss this article (0)

Installation:

To install the Lapworks Attaché Laptop Stand, all you need to do is choose an appropriate height, unfold the two posts that keep the laptop in place, and plug the Attaché into one of your laptop's free USB ports. Then you can use the switch on the side of the cooler to control the fans.

To help you choose what height to use, Lapworks has made a few recommendations. They said that to maximize the ergonomic benefit of the keyboard to use the first height setting and that all higher settings should be used only with an external keyboard and mouse.

Specifications:

  • Material: High Density ABS Plastic
  • Large aluminum plate absorbs/dissipates heat
  • Product dimensions: 12-7/8” wide x 11-3/4” tall x 1-5/8” thick
  • 4 USB 2.0 ports
  • 4 push-button elevation settings
  • Lowest elevation for ergonomic direct typing
  • Higher elevations require separate keyboard and mouse
  • Raises laptop screen to eye level for ergonomic viewing
  • 2 silent built-in cooling fans
  • weight: 2 Lbs. 7.5 oz
  • ON/OFF power switch
  • Rated Voltage: 5V DC
  • Power Current: 0.18 A
  • Rated Consumption: 0.9 W
  • Fan Speed: 2200 +/- 10% RPM
  • Fan Airflow: 20 CFM
  • Noise Level: < 23 dBA
  • Warranty: one year



  1. Introduction & Closer Look
  2. Closer Look (Continued)
  3. Installation & Specifications
  4. Testing
  5. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0253720284