Welcome Stranger to OCC!Login | Register

Kingston HyperX Fury White 2 x 4GB PC3 15000 Review

   -   
» Discuss this article (4)

Lowest Prices

Kingston HyperX Fury White 2 x 4GB PC3 15000 Specifications:

CL(IDD)
10 cycles
Row Cycle Time (tRCmin)
44.75ns (min.)
Refresh to Active/Refresh )
260ns (min.)
Command Time (tRFCmin)
 
Row Active Time (tRASmin) 
32.125ns (min.)
Maximum Operating Power
TBD W*
UL Rating
94 V - 0
Operating Temperature
0 °C to 85 °C

 

Kingston HyperX Fury White 2 x 4GB PC3 15000 Features:

  • Capacities of up to 8GB (single) and 8GB–16GB (kits)
  • Frequency (speed) 1333MHz, 1600MHz, 1866MHz
  • CAS latency 9-9-9-27 and 10-10-10-30
  • Voltage 1.5V
  • Asymmetric heat spreader for stylish heat dissipation
  • Compatible with P55, H67, P67, Z68, Z77, Z87 and H61 Intel chipsets, as well as A75, A87, A88, A89, A78 and E35 AMD chipsets
  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 933MHz fCK for 1866Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85 °C, 3.9us at 85 °C < TCASE < 95 °C
  • Asynchronous Reset
  • PCB : Height 1.180” (30.00mm), double sided component





 

All information courtesy of Kingston @ //www.kingston.com/us/hyperx/memory/fury




Related Products
Random Pic
© 2001-2017 Overclockers Club ® Privacy Policy
Elapsed: 0.0340368748   (xlweb1)