Welcome Stranger to OCC!Login | Register

Ikonik Optimus 1200 Review

Compxpert    -   January 12, 2011
» Discuss this article (0)

Lowest Prices

Closer Look:

With the packaging out of the way, we're ready to take a closer look at the case. As stated earlier, included is a metal side panel with holes for two 120mm fans. Optional however, are two types of windowed side panels but it's not known whether these can be purchased separately if desired. Moving on to the back of the case, we have what you would normally expect to see on any other case. It seems that Ikonik also went with a bottom install PSU on this model which seems to be the current trend in new cases. Next up we have the other side of the case as well as the front panel of the case.

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

The top of the case sports fan holes which can apparently hold two of either 90mm, 120mm, or 140mm fans. As you can see, Ikonik has put convenient connections on the top panel which includes an audio and mic jack as well as eSATA and two USB 2.0 ports. Last but not least, we have the bottom of the case which sports a fan filter for the PSU as well as four rubber feet which are secured to the bottom of the case with screws.

 

 

 

 

Not much is really included with the case in terms of fans or so it seems. However, while it lacks features here, it might indicate an opportunity for splurging elsewhere. I invite you to read on.




  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look (The Working Componets)
  4. Specifications & Features
  5. Testing: Setup and Results
  6. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0339679718