Welcome Stranger to OCC!Login | Register

ICute 0508ULA Computer Case

Former staff writer    -   July 5, 2006


Installation
Installing your hardware into this case is pretty straight forward, if you have installed other hardware before then this is not that much different. Though ICute made it easier with the addition of a removable motherboard tray, as well as a front bezel that pivots.


I stripped the case down, took out motherboard tray, mounted my board with the supplied standoffs, and installed it back into the case. Then proceeded to install my power supply, 4 screws later and she was in. Moving on to the front of the case I thought I broke it, but the entire front bezel of the case swings open. This made installing a 5.25� drive a snap, slide it in 2 screws, and she was snug as a bug.

Dropped in my video card, and wired it up. Double checked all connections, and I was good to go.

Specifications
Case Model 0508ULA Series
Case Type Middle Tower Case
Dimension 200*470*430mm(W*D*H)
Material ATX/Micro ATX
Drive bays External 4X5.25�, 1X3.5�
Hidden 6x3.5�
Side I/O USB*2+AUDIO+IEEE1294
FAN Front (intake) � 14cm Blue LED
Rear(exhaust) � 12cm/8cm*1(optional)
Side (intake) 25cm
CPU Cooling 12cm/8cm Blue LED
VGA Cooling � 12cm/8cm Blue LED
Feature Professional BTX airflow design concept
12cm/8cm Technical Design Air Duct cooling for CPU
Excellent VGA Cooling
Fantastic ventilation
High performance and low noise level



  1. Introduction & Closer Look
  2. Installation & Specifications
  3. Testing & Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.1014938354