HighPoint RocketRAID 2300 & 1740 SATA II Preview

Installation:

The HighPoint RocketRAID 1740 is a PCI card while the 2300 model is for PCI-Express slots. To install either card, you’ll need to first power off your machine and remove any cards in the slot that you want to install either the RocketRAID 1740 or 2300. Once your card has been installed, you can hook up to as many as four SATA II hard drives.

Configuration:

Once the drives are installed, power up your machine and you’ll be presented with the RocketRAID BIOS Utility. Press CTRL-H to access the RocketRAID BIOS, so that you can create and configure your RAID array. There is an abundant selection of options but you’ll have to come back for the full review to get the complete details.