Gigabyte GA-890GPA-UD3H 890GX Reviewjlqrb - March 1, 2010
» Discuss this article (21)
From this page you can make changes to built-in peripherals included with the motherboard. these peripherals include the SATA, USB, LAN, Serial ports, and others.
Power Management Setup:
The Power Management page is where changes to the power management operations are made. Here you can change the ACPI Suspend Type and choose which device can resume your system operations.
PCI/PnP Setup / PC Health Status:
The PCI/PnP page is where you can make changes to the to devices that are installed on the PCI bus. There is only one option found here, which lets you allocate the IRQ or interrupt request line to the PCI VGA card. The PC Health Status is where you can monitor system voltages, temperatures, and fan speeds. Here you can also set a shut-down temperature in case the CPU, Northbridge, or System get too hot, as well change settings to the SMART Fan Controller.
Now we have had a good look at the board, drivers, and BIOS, so we can now get to the testing.