Welcome Stranger to OCC!Login | Register

Gigabyte EP35-DS4 Review

Makaveli    -   March 24, 2008
» Discuss this article (1)

Lowest Prices

Specifications:

 

CPU
  1. Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel® Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package
    (Go to GIGABYTE's website for the latest CPU support list.)
  2. L2 cache varies with CPU
  3. 1600 (O.C.)/1333/1066/800 MHz FSB
Chipset
  1. North Bridge: Intel® P35 Chipset
  2. South Bridge: Intel® ICH9R
Memory
  1. 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
  2. Dual channel memory architecture
  3. Support for DDR2 1200 (O.C.)/1066/800/667 MHz memory modules
Audio
  1. Realtek ALC889A codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for DTS (dts NEO:PC)
  5. Support for S/PDIF In/Out
  6. Support for CD In
LAN Realtek 8111B chip (10/100/1000 Mbit)
Expansion Slots
  1. 2 x PCI Express x16 slots (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x4.)
  2. 3 x PCI Express x1 slots (share with the PCIE_16_2 slot)
  3. 2 x PCI slots
Storage Interface
South Bridge:
  1. 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
  2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
GIGABYTE SATA2 chip:
  1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
  2. 2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1) supporting up to 2 SATA 3Gb/s devices
  3. Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8718 chip:
  1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394
  1. T.I. TSB43AB23 chip
  2. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394 bracket connected to the internal IEEE 1394 header)
USB
  1. Integrated in the South Bridge
  2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Form Factor
ATX form factor, 305 x 244mm
Internal I/O Connectors
  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 1 x 4-pin PCIe 12V power connector
  4. 1 x floppy disk drive connector
  5. 1 x IDE connector
  6. 8 x SATA 3Gb/s connectors
  7. 1 x CPU fan header
  8. 2 x system fan headers
  9. 1 x power fan header
  10. 1 x North Bridge fan header
  11. 1 x front panel header
  12. 1 x front panel audio header
  13. 1 x CD In connector
  14. 1 x S/PDIF In header
  15. 1 x S/PDIF Out header
  16. 2 x USB 2.0/1.1 headers
  17. 1 x IEEE 1394a header
  18. 1 x parallel port header
  19. 1 x serial port header
  20. 1 x power LED header
  21. 1 x chassis intrusion header
Back Panel Connectors
  1. 1 x PS/2 keyboard port
  2. 1 x PS/2 mouse port
  3. 1 x coaxial S/PDIF Out connector
  4. 1 x optical S/PDIF Out connector
  5. 8 x USB 2.0/1.1 ports
  6. 2 x IEEE 1394a ports
  7. 1 x RJ-45 port
  8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
BIOS
  1. Supports DualBIOS Plus
  2. 2 x 8 Mbit flash ROM
  3. Use of licensed AWARD BIOS
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.
Unique Features
  1. Support for @BIOS
  2. Support for Download Center
  3. Support for Q-Flash
  4. Support for EasyTune
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
Overclocking Voltage adjustments in BIOS Setup (CPU/DDR2/PCIe/FSB/(G)MCH) Allow you to:
  1. Increase CPU voltage
  2. Increase DDR2 voltage by 0.05V to 1.55V with 0.05V increment
  3. Increase PCIe voltage by 0.05V to 0.35V with 0.05V increment
  4. Increase FSB voltage by 0.05V to 0.35V with 0.05V increment
  5. Increase (G)MCH voltage by 0.025V to 0.375V with 0.025V increment
Frequency adjustments in BIOS Setup (CPU/DDR2/PCIe) allow you to:
  1. Adjust CPU host frequency from 100 MHz to 700 MHz with 1 MHz increment
  2. Adjust DDR2 frequency
  3. Adjust PCI Express x16 frequency from 90 MHz to 150 MHz with 1 MHz increment

 

Features:

  1. Supports Intel® Core™ 2 multi-core and Intel 45nm processors
  2. Supports DDR2 1200(OC)* memory for outstanding system performance.
  3. Revolution energy saving design with GIGABYTE Dynamic Energy Saver(DES) technology.
  4. Ultra Durable 2 motherboard features High Quality CPU Power design with Ferrite core chokes, Low RDS (on) MOSFET and Solid Capacitors.
  5. Ultimate graphics performance with dual PCI-E x16 interface
  6. Integrated SATA 3Gb/s with RAID function
  7. Features high speed Gigabit Ethernet and IEEE1394
  8. Unique Silent-Pipe with outstanding cooling performance
  9. Audio controller from ALC 889A codec and DTS Connect, featuring 106 dB Signal to Noise ratio and supporting for both Blu-ray and HD DVD formats.

- All information gathered from Gigabyte's site: http://www.gigabyte.us/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=2635&ProductName=GA-P35-DS4




Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0366189480