Welcome Stranger to OCC!Login | Register

ENERMAX ETS-T40 Heatsink Review

airman    -   August 1, 2012
» Discuss this article (12)

Lowest Prices

Testing:

Testing of this heatsink will involve applying a load simulated by Prime95, using small FFTs in stock and overclocked scenarios, where both idle and load temperatures will be recorded. Load temperatures will be the maximum value displayed in RealTemp after running eight threads in Prime95 for one hour, and idle temperatures will be the minimum recorded value by RealTemp with no computer usage during a period of one hour. The temperature values for each of the four cores will be averaged and displayed in the graphs below. The ambient temperature is held at a constant 23°C throughout testing of the ENERMAX ETS-T40 as well as the comparison units. All the data shown in the graphs below is in degrees Celsius. The included thermal paste from ENERMAX will be used during testing and thermal pastes from other heatsinks provided by their respective manufacturers will be used. The fan(s) on each cooler will be run at full speed for these tests.

Testing Setup:

 

Comparison Heatsinks:

 

 

 

 

 

The performance numbers provided by the ENERMAX ETS-T40 are certainly respectable, especially while operating on only one fan. On the next page, I will offer my conclusion to this review and my opinion of its overall quality and performance.




  1. Introduction & Closer Look
  2. Closer Look (continued)
  3. Specifications & Features
  4. Testing & Setup
  5. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0265967846