ECS GF7100PVT-M ReviewMakaveli - February 25, 2008
» Discuss this article (0)
The ECS GF7100PVT-M measures in at the standard 244mm x 244mm MicroATX size. As mentioned earlier, the board has the nVidia 7100/630i chipset. The board supports 1333MHz FSB, up to 4GB of DDR2 800 memory, and new 45nm processors.
The rear I/O panel has the standard connectors with an addition of a DVI-out port. This is very convenient because DVI video quality is better than the standard VGA. Along with the DVI connector, there is a standard VGA connector, four USB connectors, a serial port, PS/2 keyboard and mouse ports, a standard Giga LAN connector, and 8 channel audio.
This motherboard features one PCI-Express x16 slot, two PCI slots, and one PCI-Express x1 slot. Below the PCI slots, you’ll find an audio header and three USB headers lined up next to one another.
The ECS GF7100PVT-M has a 24-pin power connector, as well as a 4-pin power connector that sits near the CPU. This motherboard has one IDE connector, one floppy connector, and two 240-pin DDR2 memory slots that together can support up to 4GB of RAM.
Let’s move on and take a closer look at the BIOS for this ECS GF7100PVT-M MicroATX motherboard.