Welcome Stranger to OCC!Login | Register

DimasTech Bench Test/Table Easy V2.5 Review

» Discuss this article (8)


455mm depth x 440mm width x 210mm height (height considering the pins and do not consider the spacers supporting motherboard, 25mm)
Glossy Black



  • Bench made from sheet metal 1,5 mm,
  • CNC laser cutting,
  • Powder or Enamel, basic phosphatic
  • Totally "Made in Italy"
  • Marked "Made in Italy" on the back of the Bench/Test Table
  • Compatible with ATX and Full ATX motherboard and Micro ATX, XL-ATX, Mini ATX 
  • Installation of up to 3 devices 5.25 inches
  • Installation of up to 3 hard drives (3.5 inch) 4 or more floppy disks with no floppy drive, 
  • Support for sockets with fan ventilation area 120x120,
  • Support for ventilation area opposite 120x120 video card fan
  • Latest keys wired for power and reset switches, (n ° 2)
  • Holes on the front and back of the motherboard to allow the passage of cables and pipes for watercooling downstairs
  • PSU supports positioned on the front or back of the Bench/Test Table
  • Compatibility with power supplies up to 22cm in length,
  • Lateral support for the installation of all types of radiators on the market (HwLab, Thermochill, TFC, Etc)
  • Rear space for installation of a compact liquid cooling system,
  • Thumb Screws step M3 and 6-32 (American pitch UNC)
  • Support for 120x120 mm fan for cooling systems in SLI/Crossfire
  • Rubber feet * Ram fan support 120x120 mm
  • Lower drawer with sliding tracks and fixation with screws knurled side
  • Placement supported devices on slots
  • Personalization side of the body with the basic version of the Bench/Test Table
  • Adjustable positioning device support
  • Supports for adjustable radiator over the back of the Bench/Test Table
  • Screws also knurled nuts
  • Total elimination of the use of instrumentation outside the Bench/Test Table
  • Fully compatible for mounting versions of media and Bench/Test Table Hard V1.0 and V2.0
  • Full compatibility with the new Bench/Test Table Hard V2.5
  • Prepared for 4 passes for watercooling pipes or fittings on the back of the motherboard
  • Possibility assembly front USB port (DimasTech USB Cable is available as an accessory - see section Accessories) 



Information courtesy of DimasTech @: http://www.dimastech.it/EN/c/bench-test-table-easy-v25-metallic-grey/

  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look (The Working Components)
  4. Specifications & Features
  5. Testing
  6. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.2079310417   (xlweb1)