Welcome Stranger to OCC!Login | Register

Diamond XtremeTV HDTV 110 Hybrid Tv Tuner USB 2.0

» Discuss this article (14)


TotalMedia Configuration

Once the computer starts, open up the TotlaMedia program and navigate to the Setup page. Under the General tab you will be able to set up the TV tuner to receive the signal. Basic information is needed to set up the software. First, select your country, then select the available tuner and how the signal is recieved, then the software will scan for available channels. Since there are two tuners on the StremeTV HDTV 110, you will have the option of setting up the second tuner. Select the audio device to be used and signal source, then grab a coffee and scan for channels a second time. TotalMedia includes TitanTV as its EPG (Electronic Program Guide), and there is the option to use a different provider if you have one. The tuner is now ready to be used.











That is all that is needed to enable the TV tuner in the system. There are a good amount of settings that are available to tweak the software for everyday use as well as for the DVD/Video/Pictures/Music.

  1. Introduction & Closer Look
  2. Closer Look (Continued)
  3. Installation & Configuration
  4. Configuration
  5. Specifications & Features
  6. Testing
  7. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.0446090698   (xlweb1)