Welcome Stranger to OCC!Login | Register

Diamond XtremeTV HDTV 110 Hybrid Tv Tuner USB 2.0

» Discuss this article (14)


Hardware Installation:


Installing the XtremeTV HDTV 110 USB 2.0 TV Tuner couldn't be simpler. Find an open USB 2.0 port and plug in the tuner, or USB extension cable if needed. To watch over-the-air HDTV, connect the HDTV antenna to the tuner. To watch analog over cable, use the coax adapter to connect the cable. To connect any external devices (video camera, VCR, game system) that uses RCA output, the video capture dongle is to be used.








Installing the software that comes on the CD is a quick process. Cancel out of any "Hardware Wizard" windows and select "install drivers" from the splash screen. Make sure that the XtremeTV HDTV 110 is plugged in, then confirm the dialog.



Once the drivers are installed, you can move onto the software installation. Accept the license agreement and TotalMedia will install automatically.



Once the software is installed, the last piece of the puzzle is the remote control software. Accept the dialog for the IRReceive and it installs automatically. Restart the computer and you are done.


  1. Introduction & Closer Look
  2. Closer Look (Continued)
  3. Installation & Configuration
  4. Configuration
  5. Specifications & Features
  6. Testing
  7. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.0404860973   (xlweb1)