Welcome Stranger to OCC!Login | Register

COUGAR Challenger Case Review

Waco    -   November 8, 2012
» Discuss this article (9)

Lowest Prices

Specifications:

Case Type:
Mid-Tower
Motherboard Support:
mATX/ATX
Dimensions:
268(W) x 514(H) x 523(D)
5.25" Drive Bays:
3 Exposed
3.5" Drive Bays:
1 Exposed, 7 Hidden
2.5" Drive Bays:
3 Hidden (converted from 3.5" drive bays)
External 3.5" & 2.5" HDD/SSD Hot-Swap:
1
Max. 3.5" HDDs Installed:
9
Max. 2.5" HDDs/SSDs Installed:
8
I/O Panel:
USB 3.0 x 2 (internal), Mic x 1, Audio x 1
COUGAR 200mm Red LED Fan (front):
1 (pre-installed)
COUGAR 120mm Turbine Fan (rear):
1 (pre-installed)
Ezpansion Slots:
7
Maximum GPU Length:
410mm
Power Supply:
Standard ATX PS2 (optional)

 

 

Features:

  • Innovative & revolutionary UI design takes inspiration from the pilot: unlock missile cover, then fire!
  • Interior painted black
  • Advanced two USB 3.0 ports for maximum data transfer speed and compatible for non-USB 3.0 motherboards
  • Top access external 3.5" & 2.5" HDD/SSD hot-swap for easy mobile data transfer
  • Support for 7 fans – see cooling
  • Front COUGAR 200mm red LED fan x 1 and rear COUGAR Turbine 120mm fan x1 are pre-installed.
  • Acrylic side panel.
  • Support for longer high-end graphics cards up to 300mm, 330mm, & 410mm (depending on varied graphics cards requirements to changes position of the HDD bracket).
  • 7 PCI slots to provide flexibility for multiple graphics card solutions.
  • Screw-less mechanisms on 5.25" devices.
  • 3.5" HDD trays x 7 compatible for installing 2.5" HDDs/SSDs x7.
  • Provides 2.5" HDD trays x 3 to install depending on GPU length.
  • Holes x 3 on the rear panel for water cooling solutions (with rubber protection).
  • Installation opening in the MB tray to easily upgrade the CPU cooler.
  • Cable feed through on MB tray for easily routing/hiding cables.
  • Vented slot bezels for better cooling performance.
  • Air filter on the bottom cover & side cover to prevent dust from entering the enclosure (magnet filterers are easy to uninstall and clean).

 

Cooling:

  • Front: 120mm fans x 2 / 140mm fans x 2 / 200mm fan x 1
  • Top: 120mm fans x 2 / 140mm fans x 2 / 180mm fan x 1 / 200mm fan x 1
  • Bottom: 120mm fan x 1 / 140mm fan x 1
  • Rear: 120mm fan x 1
  • Side: 120mm fan x 1 / 140mm fan x1

 

 

 

All information is courtesy of: http://www.cougar-world.com/products/pc_case/challenger.html




  1. Introduction & Closer Look
  2. Closer Look: (The Case)
  3. Closer Look: (Working Components)
  4. Specifications and Features
  5. Testing & Results
  6. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0391240120