Welcome Stranger to OCC!Login | Register

CoolJag Falcon 92-Cu Heatsink Review

» Discuss this article (10)


To properly test the CoolJag Falcon 92-Cu heatsink, I will need to record temperatures during both an idle time (little to no CPU usage), as well as during a full load (100% CPU usage). I will be using SpeedFan 4.33 to gather the temperatures of the CPU cores. I will be using OCCT:PK to simulate the full load testing and running it for 24 hours. I will let the computer sit and cool down for 24 hours before gathering the idle temperatures. I will be testing the processor at both stock speeds with stock voltage settings, as well as overclocked speeds of 3.6GHz with the voltage increased to 1.46 volts. All the temperatures are measured in degrees Celsius.  

Testing Setup:

  • Processor: Intel E6600 (Stock & 3.6GHz)
  • Motherboard: Gigabyte GA-P35-DQ6
  • Memory: Mushkin PC2-6400 (4GB)
  • Video Card: Sapphite HD3850
  • Power Supply: OCZ 700W GameXStream
  • Hard Drive: Western Digital 320GB 16MB Cache SATA
  • Optical Drive(s): Lite-on DVD-RW
  • Case: Cooler Master Cosmos 1000
  • Heatsink: CoolJag Falcon 92-Cu
  • Heatsink: Thermalright Ultra 120 Extreme
  • O/S: Windows Vista Ultimate 32-bit




  1. Introduction & Closer Look
  2. Closer Look (Continued)
  3. Specifications
  4. Testing
  5. Conclusion
Related Products
Random Pic
© 2001-2018 Overclockers Club ® Privacy Policy
Elapsed: 0.3692729473   (xlweb1)