Welcome Stranger to OCC!Login | Register

Coolermaster Musketeer 2 (LLC-U03) Review

Former staff writer    -   July 20, 2004


Installation

After taking the Musketeer out of the box I thought installation would be slightly complicated, but after getting started it's actually very simple. After removing the 5.25 bays plastic panel disconnect the HDD LED cable from the motherboard and fish it thru the 5.25' bay to the front of the case. After connecting the case HDD LED cable to the HDD out on the back of the musketeer use the included 80cm HDD LED to connect to the HDD LED in and connect the other end to the motherboards HDD LED pins. Then simply slide the Musketeer2 and attach with the supplied screws.


After mounting the musketeer2 in the 5.25' bay find an empty PCI slot and attach the supplied PCI bracket with audio IN-OUT and connect the 80cm cables to the back of the musketeer2. Then take the 3.5cm stereo cable and plug it into the audio out of your soundcard and plug the other end to the input of the PCI bracket. Also the front volume sliders do not protrude out far at all allowing me to close my case door.


Then simply find a spare 4 pin Molex connection and plug it into the Musketeer2. Now we are ready for testing.



  1. Introduction, Specfications & Closer Look
  2. Installation
  3. Testing & Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0265049934