Welcome Stranger to OCC!Login | Register

Bgears b-Envi MicroATX Case Review

Makaveli    -   May 1, 2008
» Discuss this article (3)

Closer Look:

Working Components:

To get to the inside of the case, you'll have to unscrew two screws from the back of the case and pull the top towards the back of the case. On the inside of the case, you'll find that you have room for two internal hard drives, one optical drive and a power supply. Not much, but it definitely covers the basics. I was surprised by how many cables there are to connect to the motherboard in order to use the front panel 58-in-1 card reader.

 

 

 

 

 

 

 

 

The b-Envi features a pull-out motherboard tray. This feature comes in handy a lot, especially in a small case like this because it's hard to work around everything once it is installed in the case. The only fan that is inside of this case is a big 120mm fan that sits right next to the power supply. Also, take a look at the LED buttons when you plug in the b-Envi case!

 

 

On the front of the case, you'll find two flaps that you can pull down to reveal the 58-in-1 card reader and the 2.5" removable IDE HDD enclosure.

 

 

Now that we are familiar the working components of the Bgears b-Envi case, let's get everything installed!




  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look (Working Components)
  4. Specifications & Features
  5. Testing
  6. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0428850651