Welcome Stranger to OCC!Login | Register

AZZA Toledo 301 Review

Compxpert , Speedway    -   May 20, 2011
» Discuss this article (6)

Lowest Prices

Closer Look:

With all that packaging out of the way we can finally see the case. Immediately the 250mm fan is visible on the side of the case. Also of note is that the side panel can take on two 120mm or 140mm fans if you choose not to utilize the included 250mm fan. The front of the case sports a long blue power LED bar and some stylized fins on the front panel which look nice whilst allowing air to come into the case. The right side panel is much the same as the left which maintains the cases overall symmetry. Finally moving on to the rear of the case we find that Azza maintains the bottom mounted PSU trend. The case also has a total of seven rear expansion slots and even includes water cooling support via holes beside the expansion slots and along the top panel of the case.

 

 

  

 

 

 

 

 

 

 

 

 

 

 

 

 

The top panel also has the stylized fins much like the front panel. Here also are the I/O connections and power and reset switches. The I/O consist of two USB ports as well as microphone and audio out connections. The bottom of the case appears to be able to take a 90mm, 120mm, or a 140mm fan depending on what you would wish to install there. Additionally like many other cases there also are holes featured for the PSU in case you decide to mount the PSU fan side down. The bottom also features four rubberized feet to prevent any unwanted movement of the case.

 

 

 

Now that we have the outside of the case covered, we'll move on to the inside.




  1. Introduction & Closer Look
  2. Closer Look (The Case)
  3. Closer Look (The Internal Components)
  4. Specifications & Features
  5. Testing: Setup and Results
  6. Conclusion
Random Pic
© 2001-2014 Overclockers Club ® Privacy Policy

Also part of our network: TalkAndroid, Android Forum, iPhone Informer, Neoseeker, and Used Audio Classifieds

Elapsed: 0.0342121124