AZZA Genesis 9000W Review
Waco - August 9, 2012» Discuss this article (15)
Testing:
Testing the AZZA Genesis 9000 full tower case required pushing my hardware to heat things up! Testing involved recording temperatures for the CPU, GPU, chipset, hard drives, and overall system during idle and load phases.
Load was simulated by running Prime95’s small FFTs while also running 3Dmark Vantage for one hour. The maximum temperatures were recorded using HW Monitor. It is important to note that each case is tested from its factory setup, including location of fans, unless otherwise noted.
Testing Setup:
- Processor: Core i7 2600K @ 4.4 GHz 100 x 44
- CPU Cooling: Noctua NH-U12P SE 1366
- Motherboard: GIGABYTE Z68AP-D3
- Memory: Mushkin 991996 Redline PC3-17000 9-11-10-28 8 GB
- Video Card: XFX HD 7970
- PSU: Antec TruePower New TP-750
- Hard Drive: Corsair ForceGT 240GB
- Optical Drive: N/A
- OS: Windows 7 Pro 64-Bit SP1
Comparison Cases:
- Corsair 600T
- Corsair 650D
- Thermaltake Overseer RX-I
- COUGAR Evolution
- COUGAR Solution
- Thermaltake Commander MS-I
- Bitfenix Raider
- Corsair 300R
- Corsair 550D
- Corsair Vengeance C70
- XION XON-980
Results:
Well there you have it. This case, to put it simply, rocks at cooling. There is a downside though – the stock fans are pretty loud. So while the AZZA Genesis 9000 does put up a good fight to the other cases (the exception being chipset temperatures) it's being compared to it is also easily the loudest of the bunch. That's not to say it's going to make your ears bleed like the Vantec Tornados of yesteryear but it's definitely not a silent case. Switching the fan mode to low speed (which also turns off the LED lighting) transforms the case into a quiet beast but temperatures are affected by this enough to take away most of its commanding lead on GPU and CPU temperatures. All in all a good showing by the Genesis 9000!

Facebook
Twitter
YouTube
RSS Feeds