ASUS GTX580 MATRIX ReviewGeekspeak411 - August 25, 2011
» Discuss this article (6)
Temperature testing will be accomplished by loading the video card to 100% using Crysis Warhead with MSI's Afterburner overclocking utility for temperature monitoring. I will be using a resolution of 1920x1200 using 8xAA. I will use a 10-run sequence to run the test, ensuring that the maximum thermal threshold is reached. The fan speed will be left in the control of the driver package and video card's BIOS for the stock load test, with the fan moved to 100% to see the best possible cooling scenario for the overclocked load test. The idle test will be a 20-minute cooldown with the fan speeds left on automatic in the stock speed testing and bumped up to 100% when running the overclocked idle and load testing.
- Monitoring with MSI Afterburner
- Crysis Warhead 1920x1200 8x AA
- 10-run sequence
- 20-minute idle duration
- Temperature measured in degrees Celsius
Lower = Better
Ladies and gentlemen, this is a DirectCU II cooling system. It is massive, it uses copper, and it even has dust-resistant technologies that keep dust from gathering on the blades and getting in to the bearings. That kind of dedication to total engineering pays off in dividends — that overclock there is running with a ridiculous amount of voltage, and I am satisfied.