Thermaltake Armor Extreme Edition Quad FX Case ReviewFormer staff writer - September 25, 2007
» Discuss this article (8)
Since the case is of tool-less design, most components will snap in, but you will need a screwdriver to attach your hard drive to the interior cage and PSU, which also has a 120mm LED fan attached to it for hard drive cooling and pulling outside air. All expansion slots are tool-less as well, for easy installation of PCI and PCI-e cards.
Installation of the power supply and the internal and external drives are not time consuming at all. The external and internal drives slide in and can be installed within 45 seconds.
There is no need to detach the front bezel it was done for demonstration purposes only. After all your drives and PSU are installed, screw the motherboard to the tray attach all the wires and you're ready to boot.